Road condition detector

1. Product introduction ofroad condition detector

The road condition monitoring station uses remote sensing technology to avoid damage to the road and thus will not interfere with traffic caused by the installation of road weather stations.

Under road conditions where embedded road sensors are inconvenient or impossible to install, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is safe and convenient. It requires little maintenance and is an ideal choice for road weather system components.

It can be installed on existing weather stations or other buildings with unobstructed views from the road.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow and water on road surfaces.

By providing road surface condition information, we provide road management departments with accurate monitoring data and take response measures before road safety dangers arise.

2. Road condition detector system consists of: road condition sensor, collector, pole bracket, power supply system, cloud platform

3. Application of road condition detector products

1. Install bridge deck at long distance

2. Accident-prone areas

3. Areas with heavy traffic flow

3. Rain and snow-prone areas

4. Product features of road condition detector

1. Measure road water, ice and snow from a distance

2. Measure the road condition

3. Measure the degree of water accumulation, ice surface and slipperiness

4.Non-embedded design

5. Anti-rust

6. Infrared detection up to 15 meters

7. No need to close lanes, simple installation and maintenance

8. Sturdy design, all-weather measurement

5. Technical parameters of road condition detector

Monitoring distance	2-15 meters
Detection diameter	23cm
angle	30-90 degrees
power input	220VAC, 24VDC
Maximum power consumption	5W (including lens heating)
Operating temperature	-38ºC to +70ºC
Working humidity	Degree 0 to 100%
Road state parameter output	Road water thickness: 0.00-10mm	Resolution: 0.01mm	Accuracy: 0.1mm
	Road ice thickness: 0.00-10mm
	Snow thickness on road: 0.00-10mm
	Road slippery degree: 0.00-1	Resolution: 0.01
	(*) Road temperature: -38ºC to +60ºC
	(*)Road humidity: 0-100%
	(*)Ambient temperature and humidity: -40ºC to +70ºC
	(*) Atmospheric pressure: 150-1100hPa
pavement condition report	Dry, wet, wet, snow, ice, ice water mix (sun cream)
Lens contamination detection	Pollution level measurement of optical lenses and internal automatic pollution compensation
pavement material	Concrete, asphalt pavement
communication	RS485, RS232
mean-failure	10 years
Safety	No safety issues – infrared remote sensing measurement technology