Meteorological environment monitoring equipment supplier
Insist on doing high-precision customer favorite technology products
The tunnel wind speed and wind direction detectoris a tunnel environment monitoring equipment that professionally monitors the wind speed and wind direction in the tunnel. The tunnel wind speed and wind direction detector uses ultrasonic technology to measure air flow speed and provides the tunnel master control room with detection values of wind speed and wind direction in the tunnel as a basis for ventilation and operation. basic basis. The FT-SQX1 tunnel ultrasonic wind speed and direction detector is for tunnel application. The detection probe is installed on the tunnel wall to provide the tunnel main control room with detection values of wind speed and wind direction in the tunnel as the basic basis for ventilation and operation. The detector can observe the operating status and detection data of the instrument in real time on site. At the same time, the analog and switching signals output by the data output interface can be connected to the PLC in the nearby sub-control room, and then connected to the main control room through the data optical terminal and optical fiber.
Main features of tunnel wind speed and direction detector :
1. Cast aluminum body with anodized surface to adapt to harsh environment in tunnels
2. The sampling area spans the traffic lane in the tunnel to more realistically reflect the gas flow rate in the tunnel.
3. Adopts ultrasonic detection principle and is not affected by ambient temperature
4. Non-contact detection, no moving parts inside, reducing failure rate
Tunnel wind speed and direction detector installation method:
According to the requirements of the joint design drawings, it is installed directly on the tunnel wall, in the direction of tunnel traffic, on the right side of the tunnel wall, at a height of 3 to 4 meters. The transmission signal cable uses 2 twisted pair shielded wires or RVVP4*0.3.